 |
|
 |
|
 |
|
 |
|
| Is your PFD inflating without you? |
| Convert it to a manual only for about $12 |
 |
| STEP 1 - BUY THE CAP AND A COUPLE SPARE RE-ARMING KITS WHILE YOU'RE AT IT. |
 |
| STEP 2 - REMOVE THE CLEAR CAP, YELLOW (OR RED) BOBBIN AND CO2 CYLINDER. PUT THE CAP AND BOBBIN AWAY SOME PLACE SAFE AND DRY. YOU'LL NEED THE CYLINDER IN THE NEXT STEP. INSPECT THE CYLINDER FOR RUST OR PUNCTURE HOLE AT THE SMALL END. REPLACE IF NEEDED. |
 |
| STEP 3 -
SCREW ON THE YELLOW CAP, MAKE SURE THE LEVER ARM IS AGAINST THE BODY
WITH THE GREEN CLIP OR PIN IN PLACE AND SCREW THE CYLINDER BACK IN.
WARNING: YOUR PFD WILL NOT SELF INFLATE UNTIL YOU CONVERT IT BACK! YOU MUST PULL THE RED TAB TO INFLATE. INFORM EVERY USER. |
 |
Rev.16.0
Copyright © 2016
All rights reserved.